Back
Back
2-Cylinder Inground Lift with add. wheel-free lift
P2 with Platforms|P2-R2-44-R
two lifts in one at one workplace, cylinder-in-cylinder platform lift with integrated wheel-free lift, individually and combined use; the ideal reception lift
- platforms with bended edges 4.400mm long
- additional wheel-free lift 1.900 mm stroke with repair lifting head
- surface mounted version with drive-on ramps 1000 mm long and end end-stops
- medium-pressure power pack
- synchronisation via tooth-rack out of stainless steel
- no opening of the cassette for emergency lowering procedure
- including hydraulic oil
- support legs rigid or telescopic
- frame for flush-fit installation
- automatic floor compensation
- lighting with 4 tubes
- socket 230 V mounted in platforms
- air supply integrated into platforms
- wheel-alignment set consisting of recess for turn-tables and sliding plates
Specifications
| Power supply | 400 V (AC) | |
| Length of runways | 4.400 mm | |
| Weight | ca. 1.650 kg | |
| Lifting time | ca. 35 s | |
| Lowering time | ca. 35 s | |
| Fuse protection | 16 A | |
| Cylinder diameter | 125 mm | |
| Rated load capacity | 3500 kg | |
| Ram distance | 1350 mm | |
| Lifting height | 1900 mm | |
| Length | (inkl. Auffahrklappen) 5650 mm | |
| Zahnstange (Ø 40 mm) | ||
| 3.500 kg | ||
| 1.400 - 2.000 mm | ||
| Width of runways | 600 mm | |
| 1.900 mm | ||
| Length of runways | 4800 mm | |
| Surface | pulverbeschichtet (RAL 7016 / RAL 3003) | |
| Height of runways | 140 mm | |
| Width of runways | 600 mm |